Menu

Reed instruments for : air temperature

img
With this Reed R2505 Needle Tip Probe you can measure the temperature of softer foods, rubbers and solids.

img
Designed to measure the gas temperature, the Reed R2503 Beaded Wire Probe has a temperature range of -50 to 260°C (-50 to 500°F) and is ideally suited for Medical, HVAC or Laboratory applications.

img
This right angle thermocouple probe is ideal type k probe for the following applications: Medical, Food Service Industry, and Industrial, Hard to Reach Areas.

img
The Reed R2500 probe measures temperature of air or gas inside the pipes or flat surface -50 to 900°C (-50 to 1652°F)

img
Avoid the emergency situations and carry less equipment with this Reed SD-2010 Heat Stress Meter. Buy this datalogger for quick and accurate environmental heat stress measurements. Data Transfer from SD card to Computer (EXCEL Software) was included. No extra software needed, just plug the SD card into the computer and it downloads directly to EXCEL.

img
Buy this Reed R6001 (also known as C-315) digital thermo-hygrometer with integral probe that comes with great features such data hold and relative readings, min/max memory and dual LCD readout.

img
Buy this Reed thermohygrometer datalogger from us! R6030 (was ST-172)records up to 32700 ambient temperature and relative humidity readings that can be downloaded directly to a PC via USB cable supplied.

img
With this R6020 (ST-171) Datalogger you can measure and record both ambient temperature and relative humidity. No wires are needed. Just plug the USB Data Logger into PC and start downloading the measurements on your computer using its analysis software (included). Buy this instrument today at affordable price.

img
Buy this SD-3007 thermo-hygrometer Datalogger able to made dew point and Wet bulb humidity measurements with Fast humidity measuring response time. No extra software needed.

img
Professional Infrared Video Thermometers with a great 50:1 optical resolution able provide fast, easy and accurate readings for most surface temperature measurements. A built-in camera takes still images and video which can easily saved on R2020's memory or SD Card.

img
The ST-8839 model by Reed offers precise non-contact temperature measurement with a great temperature range, from -58.0 to 1832°F (-50.0 to 1000°C)(model has been discontinued)

img
Reed R2005 (was ST-8835) is a handheld Gun thermometer which facilitates temperature measurement from a distance without contact with the object to be measured. Buy these gun thermometers, able to made precise non-contact and Type K temperature measurements.

img
These Reed R2002 Laser Thermometers are commonly used in food preparation, Safety and Fire inspectors or Diesel and Fleet maintenance. The R2002 model is simple to operate, the perfect solution if you are looking for precise non-contact temperature measurements.

img
ST-610B Digital Thermocouple Thermometer comes with a large measurement range, from -50°C to 1300°C .Compact and single input thermocouple thermometer designed for field use. It's smaller, lighter (210g), display maximum reading. Data Hold function are available.

img
These pocket size thermometers (model SD-947) take precision high temperature measurements to a new level. Reed SD-947 datalogger shows 4 channels on the Display and is featured with Automatic temperature compensation.

img
The LS-107 temperature sensor manufactured by Reed is recommended for checking temperature of oils, water and non-corrosive fluids. It measures temperature up to 700°C with great accuracy.

img
The Reed LS-104 probe measures temperature of air inside the pipes or flat surface from up to +400°C, typically designed for hard to reach areas.

img
LS-103 Air temperature sensors are precision Type K probe specially designed to measure air or compatible gases, environmental chambers, ovens, rooms, etc. Perforated shield design for good airflow allows the use without heating by radiation.

img
This RTD thermometer has a platinum resistor temperature sensor that requires less temperature compensation than thermocouple units. It has 3 selectable sensor types: PT-100, PT-500 and PT-1000 (4 wires).

img
This Heat Stress Meter (model REED 8778) is a great pocket size instrument when you need to supervise a heat stress test and measure the level of the heat stress as a result of the cumulative effect of humidity, air flow, temerature and radiant sunlight. Reed 8778 temperature/humidity meter measures how hot it really feels and provides the most accurate determination of the heat stress.In/Out function displays the WBGT value with or without direct sun exposure.

Instrument Calibration Services

We calibrate test and measuring equipment for companies across Canada to ISO 17025 standard, NIST traceable and provide accredited calibration service for almost all test and measurement instruments. As an ISO 17025 accredited Company located in Brampton (Greatest Toronto Area) we offer highest quality In-Lab or On-Site Accredited Calibration Services.

Calibration lab for Measurement Instruments

In our Type II Laboratory accredited to ISO:17025-2005 by the Laboratory Accreditation Bureau (L-A-B) we provide clients with calibration of various instruments using manufacturer's specification and ISO standards as reference. Located in Brampton, Mississauga Toronto area, our metrology lab offers calibration services for measuring instruments. 

Service and Repair information

We are ready to repair your measurement tool providing a great turn around time. We service quickly and efficiently at affordable prices almost any measurement instrument brand or model. We repair Torque Testers, Force Gauges, Micrometers, Test Stands, Calipers, Optical Projectors, Torque Wrenches, Digital Readout Systems, Height Gauges, Multimeters, Dial Indicators, Pressure Gauges and more...